Industrial-Grade Stone Finish Electrolytic Tinplate Steel Coil T4 for Container Liner Closure Component Manufacturing
Product Details
| Highlight |
stone finish tinplate coil,industrial container liner steel,metal closure tinplate T4 |
||
|---|---|---|---|
Product Description
Stone finish electrolytic tinplate is produced by electroplating tin onto a steel substrate that has been cold-rolled with work rolls bearing a controlled surface texture imparted through shot-blasting or electric-discharge texturing (EDT). After electroplating and flow-brightening, the stone finish imparts a characteristic dull, finely textured surface with controlled roughness typically in the Ra 0.35-0.60 µm range. This controlled surface topography provides distinct functional advantages for industrial applications where surface friction characteristics, lacquer adhesion performance, and consistent coating application are critical quality parameters. The T4 temper (TH415, HR30T 61 +/-3) offers an optimal balance of strength for structural applications and formability for component manufacturing processes.
Key Features- Controlled Stone Finish Surface Texture: The stone finish surface with Ra 0.35-0.60 µm provides a consistent micro-roughness that significantly enhances mechanical interlocking between the tinplate surface and subsequently applied organic coatings, lacquers, and sealants. This mechanical adhesion component, combined with the inherent chemical adhesion of the tin surface, produces total coating adhesion strength approximately 25-35% higher than bright finish tinplate in standardized cross-hatch and pull-off adhesion tests.
- Optimized Friction Characteristics for Component Feeding: The stone finish surface provides a controlled coefficient of friction (typically 0.15-0.25 static, 0.12-0.20 dynamic) that facilitates consistent and reliable feeding of closure components through high-speed assembly and lining equipment. Unlike bright finish surfaces that can exhibit unpredictable stick-slip behavior, the stone finish provides uniform friction that reduces jamming, misfeeds, and equipment downtime in automated closure manufacturing lines.
- Reduced Surface Reflectivity for Vision System Compatibility: The non-reflective stone finish surface eliminates the specular reflections that can interfere with automated optical inspection systems used in modern can-making and closure manufacturing operations. Machine vision systems for defect detection, dimensional verification, and print registration achieve higher accuracy and lower false-reject rates on stone finish surfaces compared to bright finish alternatives.
- T4 Temper Formability and Strength Balance: The T4 temper delivers yield strength in the 415-450 MPa range with elongation of 22% or greater, providing the formability required for deep-drawing closure shell components while maintaining sufficient strength for structural integrity in the finished product. This temper is specifically suited for components requiring a combination of drawing, ironing, and curling operations common in metal closure manufacturing.
- Uniform Coating Distribution on Textured Surface: The electrolytic tinning process deposits tin uniformly across the stone finish surface topography, maintaining coating weight consistency within +/-0.3 g/m² despite the surface texture. This uniform coverage ensures consistent corrosion protection across the entire component surface, including the valleys of the surface texture where thinner coating could otherwise lead to preferential corrosion initiation.
- Excellent Performance in Lined Closure Applications: The stone finish surface provides an ideal substrate for the application of plastisol and rubber-based lining compounds used in closure manufacturing. The surface texture creates enhanced mechanical keying of the lining compound to the closure shell, reducing the risk of lining detachment during consumer opening and improving the reliability of the seal between the closure and container.
| Parameter | Specification |
|---|---|
| Material Grade | MR (Medium Rigidity) Low-Carbon Steel |
| Temper (Hardness) | T4 (TH415, HR30T 61 +/-3) |
| Yield Strength | 415-450 MPa |
| Elongation | ≥22% (50mm gauge length) |
| Surface Finish | Stone (R) - Shot-Blast or EDT Textured |
| Surface Roughness (Ra) | 0.35 - 0.60 µm |
| Peak Count (Rpc) | 60 - 100 peaks/cm |
| Tin Coating Weight | 2.8/2.8 to 8.4/8.4 g/m² Equal or Differential |
| Thickness Range | 0.18mm - 0.45mm |
| Width Range | 600mm - 1050mm |
| Applicable Standards | JIS G3303, ASTM A623M, EN 10203, GB/T 2520 |
| Form Available | Coil or Cut-to-Length Sheet |
Stone finish electrolytic tinplate T4 is the preferred material for manufacturers of industrial container components and metal closures requiring controlled surface characteristics. Primary applications include metal closure shells for glass jars and bottles (lug caps, twist-off caps, press-on/twist-off closures) where the stone finish enhances lining compound adhesion and consumer opening torque consistency, sealing discs and diaphragm closures for industrial pails and drums where reliable seal integrity prevents product leakage during transport, container liner components for composite and fiber drums where the controlled surface provides reliable bonding to adhesive systems used in liner-to-drum assembly, industrial gasket and shim material where the uniform thickness and surface texture provide consistent sealing performance in flange and joint applications, metal cap and closure components for pharmaceutical and nutraceutical packaging requiring consistent liner adhesion validated through stability testing protocols, and specialty stamped and formed components for electrical and automotive applications where the combination of steel strength, tin coating corrosion protection, and controlled surface texture provides functional value beyond traditional packaging uses.
Packaging & Quality AssuranceStone finish tinplate coils and sheets are packaged with care to preserve the surface texture characteristics. Materials are wrapped with interleaving paper to prevent metal-to-metal contact, protected with VCI corrosion-inhibiting wrap, edge-protected with fiberboard rings or plastic guards, and secured with steel strapping on fumigated ISPM-15 compliant pallets. Quality assurance includes surface roughness measurement using calibrated stylus profilometry per ISO 4287, peak count determination per ISO 4287, lacquer adhesion testing using cross-hatch per ASTM D3359 and pull-off per ASTM D4541, coating weight verification by coulometric analysis per ASTM A630, and mechanical property testing per ASTM A370 including tensile, hardness, and Erichsen cupping tests. Statistical process control data including CpK analysis for surface roughness parameters is maintained for each production campaign with fully traceable documentation provided to customers upon request.
Product Highlights
Stone finish electrolytic tinplate in T4 temper with controlled surface roughness for optimal lacquer adhesion and friction characteristics. Engineered for industrial container liners, metal closure components, and applications requiring uniform surface texture for coating and sealing performance.
0.5mm MR SPCC Steel Tinplate Food Grade Can Prime Electrolytic Tinplate 0.15mm
0.5mm MR Steel Tinplate Food-Grade Can Material Product Specifications Attribute Value Product Name 0.5mm MR Steel Tinplate Food-Grade Can Material Material MR, SPCC, prime Tinplate / TFS Tin Coating 1.1/1.1, 2.8/2.8, 5.6/5.6, etc. or customized Surface Bright, Stone, Matte, Silver, Rough Stone ...
Anti Rust Steel Tinplate T1 To T5 Beverage Can Tinplate Coating DR9
Anti-Rust Steel Tinplate Beverage Can Production Product Specifications Attribute Value Product Name Anti-Rust Steel Tinplate Beverage Can Production Material MR, SPCC, prime Tinplate / TFS Tin Coating 1.1/1.1, 2.8/2.8, 5.6/5.6, etc. or customized Application Tomato paste cans, fruit cans, vegetable ...
0.28mm DR8 Electrolytic Tinplate Coil for Infant Formula Milk Powder Cans
0.28mm DR8 Electrolytic Tinplate Coil for Infant Formula Milk Powder Cans Tinplate, thin steel sheet with a coating of tin applied either by dipping in molten metal or by electrolytic deposition; almost all tinplate is now produced by the latter process. Tinplate made by this process is essentially ...
0.28mm T4 Tinplate Sheet 2.8/2.8 for Seafood Cans, JIS Certified Electrolytic Tinplate Coil
0.28mm T4 Tinplate Sheet 2.8/2.8 for Seafood Cans, JIS Certified Electrolytic Tinplate Coil Tinplate, thin steel sheet with a coating of tin applied either by dipping in molten metal or by electrolytic deposition; almost all tinplate is now produced by the latter process. Tinplate made by this ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.